How to create a virtual wifi-Hotspot in your computer via cmd.

How to create a virtual wifi-Hotspot in your computer via cmd.

How to create a virtual wifi-Hotspot in your
computer via cmd.

---

Connect through LAN or WiFi.
Open cmd as administrative rights.
Write a username & password as you want such as (Prince & 123456789).

Now type the command:-
** netsh wlan show drivers (For check your system supports or not hosting)
If Hosted Network support: Yes then your system will be supported, Now use these command.

To check drivers

1) netsh wlan set hostednetwork mode=allow ssid=Prince key=123456789

2) netsh wlan start hostednetwork..

Now go to the Run and type "ncpa.cpl"

Network connection window will be open.

now right click on "Microsoft hosted network virtual adapter" and rename it to Hotspot.

Now right click on your "Local area connection"

goto properties and click on share and check on the First checkbox and click ok.

Now enjoy your Virtual hotspot without any software.

Note:-
If you are using Windows 10 and do not want to use  "ncpa.cpl" then go through GUI.

Goto the control panel >> Network and Internet >> Network and Sharing Center >> Change adapter settings.

Now "Network connection" will be open